7 DIY Carpet Cleaning Mistakes To Avoid – When it comes to keeping your carpet clean, there’s a lot that you can do to eliminate dirt and dust as and when required, while also eliminating most stains all by yourself.
However, not being aware of the dos and don’ts can actually damage the soft fabric. Here are 7 DIY carpet cleaning mistakes to avoid in 2020 that will save you some expense and hassle at the same time.
One of the most common mistakes of carpet cleaning is to rub in a stain. Make sure to never scrub or rub over the carpet stains as it can lead to the untwisting of carpet fibers.
Mopping up spills immediately or rubbing cleaner into the fabric as soon as it spills can create irreversible damage.
Instead, dab up the liquid first using a paper towel or a clean cloth, further removing it with a cleaning solution such as vinegar and water. Repeat the process until the stain lightens and vanishes.
It’s a very common mistake that using loads of shampoo for carpet cleaning helps to remove the dirt and stains with ease. Make sure you don’t employ significantly more than the required volumes cleaner when going for a DIY carpet cleaning.
Rinsing off excess shampoo is not only tough, but shampoo build-up also leaves off-white spots on the fabric of your rug. Additionally, the shampoo deposits get gluey and attract more dust and dirt to the surface of the carpet, thereby making it look very dull.
They are not only hard to remove completely with a vacuum cleaner, but can also lead to gunk build-up on the carpet over time. Most people think that the carpet is clean, while it’s only the clean smell produced by those deodorizers.
Going for any cleaner that seems to work on the carpet is a big mistake as they are made of delicate materials that can be damaged with cleaners having strong chemicals. Make sure to always read the product label before using any cleaner to eliminate a patch or stain.
Plus, it’s equally essential to test the product by applying it on some portion on the rear of the carpet before going for a larger area. Most rugs and carpet call for specific products to clean, otherwise the fabric can bleed and lose its actual color.
Using the right cleaning agent allows you to retain the color of the carpet and keep it looking new.
Proper rinsing of the carpet to remove the cleaning product and dirt using a high-pressure water gun is essential. You can also employ a hose to get the job done.
Soap and cleaner residue sticks floating dust particles to itself, and that’s why carpets require a lot of water for proper rinsing. Once done with the rinsing, dry the fabric properly to prevent mold build-up to prevent the carpet from damaging.
Avoid leaving the cleaning of spills and food droppings for later as it can reduce the fabric’s life span. Leaving spills for a long time makes them settle and go deeper into the fabric, thereby making it harder to remove them.
Blot any liquid spills immediately using a soft cloth, especially if it’s soda stains or pet stains as they can turn into a menace when they penetrate into the fabric.
It’s good to clean your carpets to maintain good hygiene and keep the household healthy, buy make sure not to be too hard on them. Over cleaning of those delicate fabrics may lead to fraying, fading and thinning out of the carpet.
Moreover, most cleaning agents constitute strong chemicals that can harm your carpets, even leading to permanent damage if used in excess. Make sure to clean your carpet only when it’s actually necessary.
Once you are aware of common DIY carpet cleaning mistakes, you can ensure a cleaner and better-looking carpet. However, if you feel there’s a need for any professional assistance to get that done, you can always get the help of expert professionals to clean your carpet.
The dedicated cleaning methods and cleaning products can not only get the job done with ease but also keep the carpet fabric new and healthy.